J.S. Hsu, J.D. Kueck, M. Olszewski, D.A. Casada, P. J. Otaduy, “Comparison of induction motor field efficiency evaluation methods”, IEEE Trans. on Industry Applications, Vol. 34, No. 1, pp. 117-125, Jan./Feb. 1998.
 B. Lu, T.G. Habetler, R.G. Harley, “A survey of efficiency-estimation methods for in-service induction motors”, IEEE Trans. on Industry Applications, Vol. 42, No. 4, pp. 924-933, July/Aug. 2006.
 C.S. Gajjar, J.M. Kinyua, M.A. Khan, P.S. Barendse, “Analysis of a non-intrusive efficiency estimation technique for induction machines compared to the IEEE 112B and IEC 34-2-1 standards”, IEEE Trans. on Industry Applications, Vol. 51, No. 6, pp. 4541-4553, 2006.
 M. Chirindo, M. A. Khan, P. S. Barendse, “Considerations for non-intrusive efficiency estimation of inverter-fed induction motors”, IEEE Trans. on Industrial Electronics, Early Access, Published Online, 2015.
 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, IEEE Standard 112, IEEE power Engineering society, New York, 1996.
 B. Lu, T.G. Habetler, R.G. Harley, “A nonintrusive and in-service motor-efficiency estimation method using air-gap torque with considerations of condition monitoring”, IEEE Trans. on Industry Applications, Vol. 44, No. 6, pp. 1666-1674, 2008.
 Y. EI-Ibiary, “An accurate low cost method for determining electric motor’s efficiency for the purpose of plant energy management”, IEEE Trans. on Industry Applications, Vol. 39, No. 4, pp. 12-19, 2003.
 A.G. Siraki, P. Pillay, P. Angers, “Full load efficiency estimation of refurbished induction machines from no-load testing,” IEEE Trans. on Energy Conversion, Vol. 28, No. 2, pp. 317-326, 2013.
 M. Al-Badri, P. Pillay, P. Angers, “A novel algorithm for estimating refurbished three-phase induction motors efficiency using only no-load tests”, IEEE Trans. on Energy Conversion, Vol. 30, No. 2, pp. 615-625, 2015.
 V. Dlamini, R. Naidoo, M. Manyage, “A non-intrusive method for estimating motor efficiency using vibration signature analysis”, International Journal of Electrical Power and Energy Systems, Vol. 45, No. 1, pp. 384-390, 2013.
 J. R. Holmquist, M. A. Rooks, “Richter practical approach for determining motor efficiency in the field using calculated and measured values”, IEEE Trans. on Industry Applications, Vol. 40, No. 1, pp. 242-248, 2004.
 T. Phumiphak, C. Chat-Uthai, “Estimation of induction motor parameters based on field test coupled with genetic algorithm,” Proceedings of the IEEE/ICPST, pp. 1199- 1203, Kunming, China, China, Oct. 2002.
 A. Charette, J. Xu, A. Ba-Razzouk, P. Pillay, V. Rajagopalan, “The use of the genetic algorithm for in-situ efficiency measurement of an induction motor”, Proceedings of the IEEE/PESW, pp. 392-397, Singapore, Singapore, Jan. 2000.
 M. Cunkas, T. Sag, “Efficiency determination of induction motors using multi-objective evolutionary algorithms”, Advances in Engineering Software, Vol. 41, No. 2, pp. 255–261, 2010.
 P. Nangsue, P.
Pillay, S. E. Conry,
“Evolutionary algorithms for induction motor parameter determination”, IEEE Trans. on Energy Conversion, Vol. 14, No. 3, pp. 447-453, 1999.
 B. Lu, C. Wenping, I. French, K. J. Bradley, T. G. Habetler, “Non-intrusive efficiency determination of in-service induction motors using genetic algorithm and air-gap torque methods”, Proceedings of the IEEE/IAS, pp. 1186-1192, New Orleans, LA, USA, Sep. 2007.
 M. Al-Badri, P. Pillay, P. Angers, “A novel in situ efficiency estimation algorithm for three-phase IM using GA, IEEE method F1 calculations, and pretested motor data”, IEEE Trans. on Energy Conversion, Vol. 30, No. 3, pp. 1092-1102, 2015.
 I. Kostov, V. Vasil Spasov, V. Rangelova, “Application of genetic algorithm for determining the parameters of induction motors”, Technical Gazette, Vol. 16, No. 2, pp. 49-53, 2009.
 V.P. Sakthivel, S. Subramanian, “On-site efficiency evaluation of three-phase induction motor based on particle swarm optimization”, Energy, Vol. 36, No. 3, pp. 1713- 1720, 2011.
 C.P. Salomon, W.C. Sant’Ana, L.E. Borges da Silva, G. Lambert-Torres, E.L. Bonaldi, L.E.L. Oliveira, J.G.B. Silva, “Motor efficiency evaluation using a new concept of stator resistance”, IEEE Trans. on Instrumentation and Measurement, Vol. 64, No. 11, pp. 2908-2917, 2015.
 V.P. Sakthivel, R. Bhuvaneswari, S. Subramanian, “Non-intrusiveefficiency estimation method for energy auditing and management of in service induction motor using bacterial foraging algorithm”, IET Electric Power Applications, Vol. 4, No. 8, pp. 579–590, 2010.
 V.S. Santos, P.R.V. Felipe, J.R.G. Sarduy, N.A. Lemozy, A. Jurado, E.C. Quispe, “Procedure for determining induction motor efficiency working under distorted grid voltages”, IEEE Trans. on Energy Conversion, Vol. 30, No. 1, pp. 331-339, 2015.
 V.S. Santos, P.V. Felipe, J.G., Sarduy, “Bacterial foraging algorithm application for induction motor field efficiency estimation under unbalanced voltages”, Measurement, Vol. 46, No. 7, pp. 2232-2237, 2013.
 V. P. Sakthivel, R. Bhuvaneswari, S. Subramanian, “An accurate and economical approach for induction motor field efficiency estimation using bacterial foraging algorithm”, Measurement, Vol. 44, No. 4, pp. 674–684, 2011.
 D. Karaboga, “An idea based on honey bee swarm for numerical optimization, Technical report”, TR06, Turkey, Computer Engineering Department University, 2005.
 D. Karaboga, B. Akay, “A Comparative Study ofArtificial Bee Colony Algorithm”, Appl Math Comput, Vol. 214, No.1, pp.108–132, 2009.
 D. Karagoba, B. Basturk, “On the performance of artificial bee colony (ABC) algorithm”, Applied Soft Computing, Vol. 8, No.1, pp. 687-697, 2008.
 D. Karaboga, B. Akay, “A modified artificial bee colony algorithm for real-parameter optimization”, Inform Sciences, Vol. 192, pp. 120- 142, 2012.